Real Time Automation 1-800-249-1612 Contact Real Time Automation Contact Us Real Time Automation Product Support Support    
  Real Time Automation Homepage Real Time Automation Products Technologies We Offer Industrial Library Company Information


I’ve come to realize that my world is pretty different from the world experienced by many others. For example, I have the freedom to set my schedule. I pretty much come and go as I please and lately I’ve decided to stay out of the office until 10 or 11 each day.


Pretty nice, huh? The other half of that is that I still work 12 hours a day. There are always blogs like this to, plans to make, books to ready and study and a myriad of other things that go into running a business.


My world is different in how I look at the automation industry. In one of the ways I look at it there are only two classes of devices; messaging devices and I/O devices.


I/O devices, of course, are the work horse devices of EtherNet/IP. EtherNet/IP I/O devices, officially called EtherNet/IP I/O Adapters, are the sensors and actuators of the factory floor. They gather inputs from the field, condition them and send them to a Scanner device. If you have an I/O device and need to get your I/O device on EtherNet/IP, we’ve been successfully donning that now for about 12 years. It can take as little as a few hours but that’s not what I want to talk about today.


Today, I’d like to talk about those Messaging Devices. So, what are Messaging Devices and why would you want Messaging Devices on EtherNet/IP.


In my terminology Messaging Devices are any device that produces data at an intermittent rate greater than 3, 4 or 500 ms. In that definition, barcode devices, scales, RFID devices are all messaging devices.


Now scales are interesting. You could have a scale in continuous mode where you want it to deliver it’s current value continuously. In that scenario, you have a EtherNet/IP Scale that is just like an I/O Adapter. In fact, I would configure it as an I/O Adapter on EtherNet/IP.


But if your scale delivered it’s current weight every 2 seconds when the conveyor places a product on it, then it’s a messaging device. In fact, when we do scale applications we make them into dual EtherNet/IP devices able to act either as a messaging device or as an I/O device.


So what’s a messaging device on EtherNet/IP?


Well, the RTA approach is a little different than what many other EtherNet/IP implementers do. We make messaging devices as EtherNet/IP Client devices that are able to open connections to PLCs and other controllers and initiate messages.


Because they can open the connection and issues messages, our EtherNet/IP devices don’t monopolize the Ethernet bus. They only send messages when data is available.


An EtherNet/IP Barcode reader sends its barcode only when a barcode is available. An EtherNet/IP RFID device sends tag data to the controller only after reading a tag. And an EtherNet/IP Scale sends its scale data either when it is read or continuously.


So, if you are developing an EtherNet/IP Scale, developing an EtherNet/IP Barcode Reader or developing an EtherNet/IP RFID device, RTA has the perfect technology for you.

Leave a Reply

RTA, Inc. - The Industrial Networking Home for DeviceNet, EtherNet/IP, Ethernet Drive,
Modbus TCP, Modbus RTU, PROFINET CBA, PROFINET IO, BACnet, IEC 61131-3,
IEEE 1588, AS-Interface, PROFIBUS, EtherCAT and other networks.
© 2009 Real Time Automation, Inc.

Real Time Automation, Inc.
150 South Sunny Slope Road. Suite 130
Brookfield, WI 53005
© Real Time Automation, Inc. All Rights Reserved. |

(262) 439-4999 (V)
(262) 439-4989 (F)